农田土壤施用系列新型氮肥后气态氮(NH3和N2O)减排效果比较:以夏玉米季为例

为了解不同品种新型氮肥相对常规施肥其氨(NH3)和氧化亚氮(N_2O)的减排效果,本文通过田间原位试验同步研究了夏玉米生长季氮肥施用后的农田NH_3挥发和N_2O排放及其主要驱动因子.以常规施肥(复合肥+尿素,CK)为对照,设置了5个肥料处理,分别为脲铵氮肥(UA)、稳定性复合肥料(UHD)、硫包衣氮肥(SCU)、脲甲醛复合肥(UF)和有机肥(OF),施氮量(以N计)均为300 kg·hm~(-2).相关分析结果表明,氨挥发和N_2O排放受环境因子影响,均与土壤WFPS呈显著负相关(P0.05),N_2O排放还与土壤硝态氮呈极显著正相关(P0.01).进一步回归分析表明,N_2O排放(F_(N_2O))主要取决于土壤硝态氮(x)含量的变化,而氨挥发(F_(NH_3))主要取决于土壤铵态氮(x)含量的变化.与CK相比,除了UA,其它肥料处理都降低了土壤的氨挥发,尤其是UF和OF处理减少了37%~43%.但对于N_2O排放,所有处理与CK皆无显著差异.进一步计算每种处理氨挥发和N_2O的气态氮损失总量,与CK相比,UHD、SCU、UF和OF分别减排了9%、5%、30%和23%,而UA增加了3%.     

上海典型持续性PM2.5重度污染的数值模拟

本研究针对2013年1月23~24日的上海PM_(2.5)持续重污染过程,采用WRF-Chem大气化学模式以及PM_(2.5)质量浓度、能见度、气象要素等地面实测资料相结合的方式,揭示了造成上海冬季PM_(2.5)持续性重污染的一类"天气学必要成因",即一次弱冷空气活动过程导致了两种不利污染天气条件——"弱气压场(静稳形势)"和"弱冷空气扩散(输送形势)",两者先后影响上海造成PM_(2.5)浓度持续上升.主要过程如下:首先弱冷空气影响之前,上海处在不利的局地气象扩散条件下,受弱气压场控制10 h后本地PM_(2.5)质量浓度达到重度污染水平,之后夜间稳定边界层(地面静风和低层逆温)使得PM_(2.5)重度污染维持了7h,期间PM_(2.5)平均质量浓度为172.4μg·m~(-3).后期弱冷空气影响上海,虽然改善了局地扩散条件但是同时产生了明显的周边污染物输送,使得本地PM_(2.5)质量浓度升高并达到峰值(280μg·m~(-3)),继续加重污染水平,期间PM_(2.5)平均质量浓度为213.6μg·m~(-3).WRF-Chem模拟结果进一步表明,整个污染过程周边区域输送对上海PM_(2.5)平均贡献率为23%,其中两个阶段周边区域输送的平均贡献率分别为17.2%和32.2%,可见在不同的污染天气条件下周边污染源的贡献存在显著差异,因此可以根据对污染天气类型的预判制定应急减排方案.     

长江口及邻近海域春夏季有色溶解有机物时空分布特征及主要影响因素

利用三维荧光光谱(EEMs)-平行因子(PARAFAC)分析技术对长江口及邻近海域春季(2015年3月)和夏季(2015年7月)有色溶解有机物(CDOM)的荧光组成及分布特征进行分析.共识别出2类4个荧光组分,即类腐殖质组分C1(370/495nm)、C2(330/405 nm)、C3(365/440 nm)及类蛋白质组分C4(295/345 nm).春夏季各层4个荧光组分分布模式基本一致,从长江口到邻近海域逐渐降低.春季类腐殖质组分的高值区分布在长江口内,而类蛋白组分高值区位于南槽附近区域,表层的CDOM主要来源于陆源输入和人类活动;中层荧光强度值比表层低,受陆源影响减弱;底层荧光强度值比中层略高,是由沉积物再悬浮造成的.各荧光组分在岱山县附近海域均有一个较高值,这与岛上的居民活动有关.夏季荧光组分高值区与春季相似,各层荧光组分值接近,说明夏季研究区域水体混合较均匀.春夏季腐殖化指数(HIX)在长江口较高,而生物指数(BIX)在邻近海域较高.将4个荧光组分(C1~C4)、吸收系数(a355)与盐度(S)、溶解有机碳(DOC)、总氮(TN)、总磷(TP)、叶绿素a(Chl-a)、溶解氧(DO)做冗余分析.结果表明,4个荧光组分(C1~C4)与总氮(TN)、总磷(TP)主要受陆源输入、人类活动的影响,溶解有机碳(DOC)受陆源与海源的共同影响.本文利用三维荧光光谱-平行因子分析(EEMs-PARAFAC)技术结合多元统计方法解析了CDOM组成,清晰揭示了长江口及邻近海域CDOM的来源及主要影响因子,可为河口海域生源要素海洋生物地球化学研究提供有益的补充.     

南昌市固定燃烧点源大气污染物排放清单及特征

大气污染物排放清单是了解区域污染物排放特征、准确模拟空气质量的重要资料,而工业点源是大气污染的重点排放源.通过收集相关活动水平信息和合理的排放因子,采用"自下而上"的方法建立了南昌市2014年点源大气污染物排放清单.结果表明,SO_2、NO_x、CO、PM_(10)、PM_(2.5)和VOC排放总量分别为29576.2、17115.1、25946.6、4689.4、922.9和1190.4 t,其中,金属炼制行业对SO_2、CO和VOC的贡献最高,分别占37.75%、30.59%和38.45%;火电行业是NO_x的主要来源,其贡献率为47%;水泥等建材制造行业对PM_(10)和PM_(2.5)排放贡献最高,分别为26%和25%.根据排放源污染物排放量及地理坐标信息,建立了0.4 km×0.4 km的污染物排放量空间分布特征图,结果表明,南昌市大气污染物排放较为集中,青山湖区北部和新建区北部是SO_2、NO_x、CO和VOC的主要排放区,而PM_(10)和PM_(2.5)的排放量相对分散,并在安义县出现排放高值区.通过将计算结果与统计数据结果进行对比,了解所估算清单的准确程度.对SO_2和NO_x的计算值和统计值进行统计分析,结果显示,NMB(标准化平均偏差)和NME(标准化平均误差)值均小于50%,清单计算精度较高.同时,为了解清单数据质量,对清单的不确定性进行定量分析,结果显示,SO_2和VOC不确定性较低而PM_(10)和PM_(2.5)的不确定性相对较高,清单整体不确定性与其他研究结果相差不大.建议后期研究可以从提升基础数据质量和建立具有区域代表性的排放因子数据库着手,从而减小排放量的不确定性,获得精准可靠的大气污染物清单并应用于空气质量模型预报等更深入的研究.     

桉树叶提取液还原石墨烯电极提高微生物燃料电池产电性能的研究

将桉树叶提取液绿色还原氧化石墨烯(G-rGO)电极和微生物还原氧化石墨烯(B-rGO)电极依次作为微生物燃料电池(MFC)阳极,采用红外光谱(FTIR)、X射线衍射(XRD)、扫描电镜(SEM)对所制备的电极进行表征,并采用循环伏安法(CV)、交流阻抗法(EIS)对比2种电极的电化学性能.结果发现,G-rGO阳极的内阻为243.87Ω,应用于MFC时最大功率密度和最大输出电压分别为18.77 W·m~(-3)和760 mV,对照组B-rGO电极的内阻为299.11Ω,将其应用于MFC时最大功率密度和最大输出电压分别为13.16 W·m~(-3)和635 mV,对照组未修饰阳极的内阻为375.21Ω,最大功率密度和最大输出电压分别为8.97 W·m~(-3)和480 mV.研究表明,G-rGO电极电阻更小,导电性能更优越.     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

The general utilization of scrapped PC board

The traditional burning process is used to recover copper from scrapped PC board (printed circuit board) but it causes serious environmental problems. In this research a new process was developed which not only prevents pollution problems, but also maximizes the utility of all the materials on the waste board. First, the scrapped PC board was crushed and grounded, then placed in the NH₃/NH₅CO₃ solution with aeration in order to dissolve copper. After distilling the copper NH₃/NH₅CO₃ solution and then heating the distilled residue of copper carbonate, pure copper oxide was obtained with particle size of about 0.2 μm and the shape elliptical. The remaining solid residue after copper removal was then leached with 6 N hydrochloric acid to remove tin and lead. The last residue was used as a filler in PVC plastics. The PVC plastics with PC board powder as filling material was found to have the same tensile strength as unfilled plastics, but had higher elastic modulus, higher abrasion resistance, and was cheaper.     

Food chain transfer of cadmium and lead to cattle in a lead–zinc smelter in Guizhou, China

Cadmium (Cd) and Lead (Pb) are environmental pollutants. Environmental samples and bovine tissues were collected from the areas around a lead–zinc smelter in Guizhou, China for Cd, Pb, zinc (Zn) and copper (Cu) analysis. Cd in soil (10 mg/kg) and feed (6.6 mg/kg) from the polluted areas was 10 times higher than the Chinese Standards, resulting in higher Cd in bovine kidney (38 mg/kg) and liver (2.5 mg/kg). Pb in feed (132 mg/kg) from the polluted area was much higher than unpolluted areas, causing higher Pb levels in bovine tissues. Environmental Zn was elevated, but bovine tissue Zn was normal. Cu in bovine liver decreased with increased Cd and Pb. Metals in drinking water and in bovine muscle were within the Standard range. Thus, in the areas of this lead–zinc smelter, the environment has been contaminated with Cd and Pb, which has been transferred to cattle through the food chain.     

Methanolysis and Hydrolysis of Polycarbonate Under Moderate Conditions

Alkali-catalyzed methanolysis and hydrolysis of polycarbonate (PC) in a solvent in which PC can substantially dissolve such as N-methyl-2-pyrrolidone, 1,4-dioxane, tetrahydrofuran and so on were studied. Reaction conditions were optimized for the purpose of recycling PC in the form of bisphenol A and carbon carbonate. The results showed that both the methanolysis and hydrolysis of PC could take place under moderate conditions. Under the conditions of reaction temperature 40 °C, m(PC):m(MeOH) = 1:1, m(PC):m(NaOH) = 50:1, reaction time 35 min and using tetrahydrofuran as solvent, the methanolysis conversion of PC was almost 100% and the yield of bisphenol A was over 95%. Moreover, under the conditions of reaction temperature 100 °C, m(PC):m(H₂O) = 1:0.7, m(PC):m(NaOH) = 10:1, reaction time 8 h and using 1,4-dioxane as solvent, the hydrolysis conversion of PC was almost 100% and the yield of bisphenol A was over 94%.     

Ionic composition of TSP and PM2.5 during dust storms and air pollution episodes at Xi'an,China

TSP and PM_2.5 samples were collected at Xi'an, China during dust storms (DSs) and several types of pollution events, including haze, biomass burning, and firework displays. Aerosol mass concentrations were up to 2 times higher during the particulate matter (PM) events than on normal days (NDs), and all types of PM led to decreased visibility. Water-soluble ions (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, F^?, Cl^?, NO₃^?, and SO₄^2?). were major aerosol components during the pollution episodes, but their concentrations were lower during DSs. NH₄⁺, K⁺, F^?, Cl^?, NO₃^?, and SO₄^2? were more abundant in PM_2.5 than TSP but the opposite was true for Mg²⁺ and Ca²⁺. PM collected on hazy days was enriched with secondary species (NH₄⁺, NO₃^?, and SO₄²) while PM from straw combustion showed high K⁺ and Cl^?. Firework displays caused increases in K⁺ and also enrichments of NO₃^? relative to SO₄^2?. During DSs, the concentrations of secondary aerosol components were low, but Ca²⁺ was abundant. Ion balance calculations indicate that PM from haze and straw combustion was acidic while the DSs samples were alkaline and the fireworks' PM was close to neutral. Ion ratios (SO₄^2?/K⁺, NO₃^?/SO₄^2?, and Cl^?/K⁺) proved effective as indicators for different pollution episodes.